Net2phone Max 430 User Manual download pdf (Page 75)

Max 410/420/430 User’s Guide – Chapter 5

ensure that after the upgrade, the faxes will be

transmitted using the T.38 fax protocol on the

Net2Phone network.

a. In the Web Manager, click the Account Config

link in the sidebar menu.

b. For each port that has a setting of Y in the FAX

Only field, click the N radio button. If no ports

are set to Y, you can proceed to the Performing

the Upgrade section below.

c. Click the Save Changes button at the bottom of

the page to save the settings.

Once you have completed this procedure, proceed to the

following section, Performing the Upgrade.

Performing the Upgrade

To upgrade the Max firmware:

1. Click the Download button to download the

executable file to the C:\Net2Phone\Upgrade folder.

2. Open your Windows Explorer and navigate to the

C:/net2phone/upgrade folder. Double-click the

max4x0up.exe file to begin the upgrade process.

3. You will be prompted for the following information:

a. User Name

b. Password

c. Max IP Address

4. Follow the remaining prompts to complete the

upgrade.

If you encounter any problems after you have upgraded

the Max, including faxing, calling, receiving calls, etc., re-

load the factory default settings and re-enter your

configuration settings.

To re-load the factory default settings and re-enter

your configuration settings:

1. In the Web Manager, click the Load Default Config

link in the sidebar menu.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 95 96

No comments

Net2phone Max 430 User Manual Page 75