Net2phone Max 430 User Manual download pdf (Page 46)

Max 410/420/430 User’s Guide – Chapter 5

 Idle – CDR is not enabled

NOTE: If a default gateway address or a

DNS server address is not used the value

0.0.0.0 must be entered into their

respective boxes. If the boxes are left

blank the modified configuration settings

will not be saved.

REMINDER: Configuration changes you

make in the Max 410/420/430 are not

applied until you reset the unit. To do this,

you may either:







go to the Restart System page (see

Restart System on page 52 in this

Guide) and click Restart,







type /system/reset at the

command prompt, or







power-off the unit, wait 10 seconds,

and turn it on again.

Configuring Firewalls

In Max-to-Max calling (when you call any Max unit from

another Max), if either Max is connected to a LAN that

employs a firewall, you will need to configure settings on

both the Max and the firewall before Max-to-Max calls can

be placed. This section will explain how to make the

necessary adjustments.

If your connection to the Internet utilizes a firewall, several

ports will have to be opened to allow your Net2Phone Max

gateway to make and receive calls to other Net2Phone

devices.

UDP Port 6801 must be opened. The following port

types/ranges must also be opened (the numbers displayed

are the default start points for each):







UDP Port (OPAL) 7000







TCP Port 4000

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 95 96

Comments to this Manuals

No comments

Net2phone Max 430 User Manual Page 46

Comments to this Manuals