Net2phone Max 430 User Manual download pdf (Page 25)

Max 410/420/430 User’s Guide – Chapter 3

3 Connecting the Max

410/420/430 to a LAN

Whether your LAN uses DHCP or static addresses, you

can set the Max 410/420/430’s LAN configuration in either

of two ways:







via a touch-tone keypad, or







through a serial connection via the

HyperTerminal terminal-emulator application.

This section explains how to set the Max 410/420/430’s

LAN configuration using either method.

This chapter describes:

 Connecting the Max 410/420/430

to a DHCP LAN

 Connecting to a LAN with static

IP addresses

NOTE: On a Max 410, LAN settings must

be configured using a PC with a serial

cable connection using the HyperTerminal

terminal emulator application, which is

included with all MS operating systems.

Connecting the Max 410/420/430 to

a DHCP LAN

This section explains how to connect your Web browser to

the Max 410, 420, or 430 if your LAN uses DHCP

addressing. If your LAN uses static IP addresses, skip to

Connecting to a LAN with Static IP Addresses, on page

20 in this Guide.

The default configuration for the Max 410, 420, and 430 is

for DHCP (Dynamic Host Configuration Protocol).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 95 96

No comments

Net2phone Max 430 User Manual Page 25